ELESA+GANTER

GN 713 Side thrust pins with thread

You need to log in to save favorites

Log in
  • RoHS
Side thrust pins with thread GN 713 ×
Side thrust pins with thread GN 713

Description

Specification

Types

  • Type SB: thrust pin Steel, with seal
  • Type SA*: thrust pin Steel, without seal
* not available from stock, requires a minimum order quantity
Housing Steel
zinc plated, blue passivated
Thrust pin Steel, hardened
zinc plated, blue passivated
Thrust spring coding
Force low thrust: grey
medium thrust: black
high thrust: silver
Seal rubber
NBR (Perbunan)

Information

Spring loaded side thrust pins GN 713 are versatile and practical elements for holding, positioning and clamping workpieces.
They eliminate costly alternatives, are space saving and simple to install. The protruding height of the thrust pin can be adjusted with the threaded body.
For easy mounting a suitable tool GN 713.1-is available (see table).

Accessory

  • Mounting tools GN 713.1 (Code no. see table)

Technical information

Technical and assembly instructions

w = movement of pin
F = Side thrust in N
initial thrust = F0
end thrust = 1.1 x F0
a2-a1 = clamping range for workpiece
x = distance centre line – thrust point at w2
x1 for highest thrust point (a1)
x2 for lowest thrust point (a2)
l0 = Distance end stop – bore of thrust bush
l0 = lm + x
lm = average length of workpiece lmax. + lmin./2
For contact points (workpiece height) between a1 and
a2 a value for x has to be used lying between x1 and
x2 (interpolation).

By observing the above values the full movement of the side thrust pin will be available to cover the tolerance of the workpiece.

For inserting the side thrust pins the use of a mounting tool GN 715.1 or spanner GN 713.1 is recommended.

Eccentric bushes  GN 715.2  are tooling accessory for GN 714  / GN 715 . They enable a precise optimum setting of side thrust pins. This allows an adjustment to l0 to accommodate for instance a larger tolerance range on a workpiece.

Side thrust pins with thread GN 713
GN 713
Adjust table
Filter
Description d1 Side thrust
F0 in N ≈
at l2		 l1 -1.5 d2 a1 a2 k l2 l3 s w x1 x2 Code no.
for mounting tool		 Weight
GN 713-5-20-11,5-SB 5 20 11.5 M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 4
GN 713-5-20-19-SB 5 20 19 M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 6
GN 713-5-20-26,5-SB 5 20 26.5* M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 8
GN 713-5-50-11,5-SB 5 50 11.5 M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 4
GN 713-5-50-19-SB 5 50 19 M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 6
GN 713-5-50-26,5-SB 5 50 26.5* M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 8
GN 713-5-100-11,5-SB 5 100 11.5 M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 4
GN 713-5-100-19-SB 5 100 19 M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 7
GN 713-5-100-26,5-SB 5 100 26.5* M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 9
GN 713-6-40-11,5-SB 6 40 11.5 M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 5
GN 713-6-40-19-SB 6 40 19 M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 7
GN 713-6-40-26,5-SB 6 40 26.5* M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 8
GN 713-6-75-11,5-SB 6 75 11.5 M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 5
GN 713-6-75-19-SB 6 75 19 M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 7
GN 713-6-75-26,5-SB 6 75 26.5* M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 9
GN 713-6-150-11,5-SB 6 150 11.5 M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 7
GN 713-6-150-19-SB 6 150 19 M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 8
GN 713-6-150-26,5-SB 6 150 26.5* M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 10
GN 713-10-100-18-SB 10 100 18 M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 19
GN 713-10-100-31,5-SB 10 100 31.5 M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 28
GN 713-10-100-45-SB 10 100 45* M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 36
GN 713-10-200-18-SB 10 200 18 M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 20
GN 713-10-200-31,5-SB 10 200 31.5 M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 29
GN 713-10-200-45-SB 10 200 45* M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 40
GN 713-10-300-18-SB 10 300 18 M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 21
GN 713-10-300-31,5-SB 10 300 31.5 M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 30
GN 713-10-300-45-SB 10 300 45* M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 38
GN 713-5-20-11,5-SA 5 20 11.5 M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 4
GN 713-5-20-19-SA 5 20 19 M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 6
GN 713-5-20-26,5-SA 5 20 26.5* M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 8
GN 713-5-50-11,5-SA 5 50 11.5 M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 4
GN 713-5-50-19-SA 5 50 19 M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 6
GN 713-5-50-26,5-SA 5 50 26.5* M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 8
GN 713-5-100-11,5-SA 5 100 11.5 M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 4
GN 713-5-100-19-SA 5 100 19 M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 7
GN 713-5-100-26,5-SA 5 100 26.5* M 12 2.5 5.7 1.5x45° 6.7 6 10 1.6 1.7 1.3 GN 713.1-5.6 9
GN 713-6-40-11,5-SA 6 40 11.5 M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 5
GN 713-6-40-19-SA 6 40 19 M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 7
GN 713-6-40-26,5-SA 6 40 26.5* M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 8
GN 713-6-75-11,5-SA 6 75 11.5 M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 5
GN 713-6-75-19-SA 6 75 19 M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 7
GN 713-6-75-26,5-SA 6 75 26.5* M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 9
GN 713-6-150-11,5-SA 6 150 11.5 M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 7
GN 713-6-150-19-SA 6 150 19 M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 8
GN 713-6-150-26,5-SA 6 150 26.5* M 12 3 7.7 1.5x45° 10,7 10 10 1.8 1.9 1.4 GN 713.1-5.6 10
GN 713-10-100-18-SA 10 100 18 M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 19
GN 713-10-100-31,5-SA 10 100 31.5 M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 28
GN 713-10-100-45-SA 10 100 45* M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 36
GN 713-10-200-18-SA 10 200 18 M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 20
GN 713-10-200-31,5-SA 10 200 31.5 M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 29
GN 713-10-200-45-SA 10 200 45* M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 40
GN 713-10-300-18-SA 10 300 18 M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 21
GN 713-10-300-31,5-SA 10 300 31.5 M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 30
GN 713-10-300-45-SA 10 300 45* M 18 x 1.5 5 10.7 2x45° 16.7 16 16 3.2 3.4 2.7 GN 713.1-10 38

These products could be interesting for you as well