GN 614.1 Holder for spring plungers / Side thrust pins

Description

Specification

Types

Type LKU: Fixing from the left, with spring plunger

Type RKU: Fixing from the right, with spring plunger

Type BKU: Fixing from both sides, with spring plunger

Type L: Fixing from the left, without spring plunger

Type R: Fixing from the right, without spring plunger

Type B: Fixing from both sides, without spring plunger

Zinc die casting

nickel plated

Spring plungers GN 614-KU

Housing

Plastic (Polyacetal POM)

temperature resistant up to 50 °C

Ball Stainless Steel AISI 420C, hardened

Holder for spring plungers / Side thrust pins GN 614.1 are used for arresting and as press-on or press-off elements. The easy attachment using one or two countersunk screws also allows its use where a location borehole with the tolerance field H7 for the spring plunger would not be possible from its size and manufacturability.

Side thrust pins GN 614.1 consist of a holder for spring plungers and a Stainless Steel-Spring plungerGN 614 of type KU

For types R, L and B, only a „empty“ holder for spring plungers (without spring plungers) are supplied which can then be used together with all other design variants of GN 614-6 and GN 614-8 of the types KD, MS and NI.

Technical information

Stainless Steel characteristics

GN 614.1

Filter
Description	d₁	d₂	d₃	d₄ -0.05	b	h₁ ±0.05	h₂	l₁ ±0.05	l₂	w -0.1	Spring load in N ≈ initial	Spring load in N ≈ end	Weight
GN 614.1-6-LKU	6	5	3.2 \| M 3	3	8.5	4.25	3.2	7.5	3	1.6	6.5	13	4
GN 614.1-8-LKU	8	6.5	4.3 \| M 4	4	10.5	5.25	4.2	9.5	4	1.9	8	18	7
GN 614.1-6-RKU	6	5	3.2 \| M 3	3	8.5	4.25	3.2	7.5	3	1.6	6.5	13	4
GN 614.1-8-RKU	8	6.5	4.3 \| M 4	4	10.5	5.25	4.2	9.5	4	1.9	8	18	7
GN 614.1-6-BKU	6	5	3.2 \| M 3	3	8.5	4.25	3.2	7.5	3	1.6	6.5	13	5
GN 614.1-8-BKU	8	6.5	4.3 \| M 4	4	10.5	5.25	4.2	9.5	4	1.9	8	18	7
GN 614.1-6-L	6	-	3.2 \| M 3	3	8.5	4.25	3.2	7.5	3	1.6	6.5	13	3
GN 614.1-8-L	8	-	4.3 \| M 4	4	10.5	5.25	4.2	9.5	4	1.9	8	18	5
GN 614.1-6-R	6	-	3.2 \| M 3	3	8.5	4.25	3.2	7.5	3	1.6	6.5	13	4
GN 614.1-8-R	8	-	4.3 \| M 4	4	10.5	5.25	4.2	9.5	4	1.9	8	18	5
GN 614.1-6-B	6	-	3.2 \| M 3	3	8.5	4.25	3.2	7.5	3	1.6	6.5	13	4
GN 614.1-8-B	8	-	4.3 \| M 4	4	10.5	5.25	4.2	9.5	4	1.9	8	18	8