ELESA+GANTER

GN 714 Side thrust pins without pressure pin, press on type

You need to log in to save favorites

Log in
  • RoHS
Side thrust pins without pressure pin, press on type GN 714 ×
Side thrust pins without pressure pin, press on type GN 714

Description

Specification

Housing Aluminium
blank
Thrust plate with female thread
hardened, blackened
Thrust spring coding
Force, low thrust: grey
medium thrust: lack
high thrust: silver
Seal rubber
NBR (Perbunan)

Information

Side thrust pins GN 714 are the result of further development of GN 715 . It is left to the customer to design his own pressure pin which can be screwed into the thrust plate.
This design extends the field of applications for side thrust pins offering identical advantages i.e. they eliminate costly alternatives, are space saving and are simple to install. The knurled body requires bore to H8 tolerance only.
For easy mounting a suitable tool GN 715.1 is available (see table)

Accessory

  • Mounting tools GN 715.1 (Code no. see table)

Technical information

Technical and assembly instructions

w = Movement of pin
F = Side thrust in N
initial thrust = F0
end thrust = 1.1 x F0
a2-a1 = Clamping range for workpiece
x = Distance centre line – thrust point at w2
x1 for highest thrust point (a1)
x2 for lowest thrust point (a2)
l0 = Distance end stop – bore of thrust bushing
l0 = lm + x
lm = Average length of workpiece lmax. + lmin./2
For contact points (workpiece height) between a1 and
a2 a value for x has to be used lying between x1 and
x2 (interpolation).

By observing the above values the full movement of the side thrust pin will be available to cover the tolerance of the workpiece.

For inserting the side thrust pins the use of a mounting tool GN 715.1 or spanner GN 713.1 is recommended.

Eccentric bushes  GN 715.2  are tooling accessory for GN 714 / GN 715 . They enable a precise optimum setting of side thrust pins. This allows an adjustment to l0 to accommodate for instance a larger tolerance range on a workpiece.

Side thrust pins without pressure pin, press on type GN 714
GN 714
Adjust table
Filter
Description d1 Side thrust
F0 in N ≈
at l2		 d2 d3 H8 h min. l1 -1 l2 l3 l4 w Code no. Weight
GN 714-10-20 10 20 M 4 10 12 12 4 1.5 4.5 1.6 GN 715.1-5.6 2
GN 714-10-40 10 40 M 4 10 12 12 7.5 1.5 4.5 2 GN 715.1-5.6 2
GN 714-10-50 10 50 M 4 10 12 12 4 1.5 4.5 1.6 GN 715.1-5.6 2
GN 714-10-75 10 75 M 4 10 12 12 7.5 1.5 4.5 2 GN 715.1-5.6 2
GN 714-10-100 10 100 M 4 10 12 12 4 1.5 4.5 1.6 GN 715.1-5.6 2
GN 714-10-150 10 150 M 4 10 12 12 7.5 1.5 4.5 2 GN 715.1-10 2
GN 714-16-100 16 100 M 6 16 18 18 11.5 2 7.5 3.2 GN 715.1-10 9
GN 714-16-200 16 200 M 6 16 18 18 11.5 2 7.5 3.2 GN 715.1-10 9
GN 714-16-300 16 300 M 6 16 18 18 11.5 2 7.5 3.2 GN 715.1-10 10

These products could be interesting for you as well