GN 712.1 Cam action indexing plungers Plunger Pin in standard position retracted

Description

Specification

Types

Type A: without rest position, without lock nut

Type AK: without rest position, with lock nut

Type R: with rest position, without lock nut

Type RK: with rest position, with lock nut

Type S: with safety rest position, without lock nut

Type SK: with safety rest position, with lock nut

Steel

zinc plated, blue passivated

Stainless Steel AISI 303

Latch

Plastic Technopolymer (Polyamide PA)

black, matt

not removable

Cam action indexing plungers GN 712.1 are used in such applications where the plunger must not protrude continually. When turning the cam by 90° resp. 120° degrees in anti-clockwise direction, the plunger is moved through a curved opening in the body. After that, the plunger is protruded.

Depending on the type, the plunger is moved back by a spring in its original position (Type A), is held in protruded position (Type R), resp. is secured against accidental operation (Type S). In order to move the plunger, safety version Type S requires an additional pushing of the latch.

Range of cam action indexing plungers

Technical information

ISO-Fundamental Tolerances

Stainless Steel characteristics

Plastic characteristics

Load rating information

On request

Stainless Steel guide

GN 712.1

Filter
Description	d₁ Pin -0.02/-0.05 Bore G7	d₂	d₃	l₁ ≈	l₂ ±0.5	l₃ min.	l₄	Spring load in N ≈ initial	Spring load in N ≈ end	Weight
GN 712.1-6-M16x1,5-A	6	M 16 x 1.5	16	60	8	35	32	7	16.5	54
GN 712.1-8-M16x1,5-A	8	M 16 x 1.5	16	60	8	35	32	7	16.5	55
GN 712.1-6-M16x1,5-AK	6	M 16 x 1,5	16	60	8	35	32	7	16.5	60
GN 712.1-8-M16x1,5-AK	8	M 16 x 1.5	16	60	8	35	32	7	16.5	60
GN 712.1-6-M16x1,5-R	6	M 16 x 1.5	16	60	8	35	32	7	16.5	54
GN 712.1-8-M16x1,5-R	8	M 16 x 1.5	16	60	8	35	32	7	16.5	60
GN 712.1-6-M16x1,5-RK	6	M 16 x 1.5	16	60	8	35	32	7	16.5	60
GN 712.1-8-M16x1,5-RK	8	M 16 x 1.5	16	60	8	35	32	7	16.5	73
GN 712.1-6-M16x1,5-S	6	M 16 x 1.5	16	60	6	35	32	7	16.5	60
GN 712.1-8-M16x1,5-S	8	M 16 x 1.5	16	60	6	35	32	7	16.5	65
GN 712.1-6-M16x1,5-SK	6	M 16 x 1.5	16	60	6	35	32	7	16.5	70
GN 712.1-8-M16x1,5-SK	8	M 16 x 1.5	16	60	6	35	32	7	16.5	75