GN 214.3 Stainless Steel-Locking pins Plastic slide, with axial lock (Pawl)

Description

Specification

Stainless Steel AISI 303

Slide / Push button

Plastic

temperature resistant up to 80 °C

red

Pawl

Stainless Steel sheet metal AISI 304

Lifting ring

Stainless Steel AISI 301

Spring

Stainless Steel AISI 301

Stainless Steel-Locking pins with axial lock GN 214.3 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be often removed and re-placed again.

The rectangular pawls made of Stainless Steel sheet metal keep the locking pin in an axial position in the bore. It can be retracted by pressing the button, once released it returns the pressure spring into its locking position.

The version with swivelling lifting ring is ideal for the use in confined spaces.

The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule our any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

Range of locking pins

Accessory

Ball chains GN 111

Stainless Steel-Ball chains GN 111.5

Retaining cables GN 111.2

Spiral retaining cables GN 111.4

Technical information

Stainless Steel characteristics

Plastic characteristics

GN 214.3

Filter
Description	d₁ -0.1	l₁ +0.4	a	b	d₂	d₃	d₄	d₅	l₂	l₃	Load in kN ≈ (Double sided shear force) see information	Weight
GN 214.3-6-10	6	10	2.3	0.5	7.5 +0.5	5.9	12	23	7	38	17	18
GN 214.3-6-12	6	12	2.3	0.5	7.5 +0.5	5.9	12	23	7	38	17	18
GN 214.3-6-16	6	16	2.3	0.5	7.5 +0.5	5.9	12	23	7	38	17	18
GN 214.3-6-20	6	20	2.3	0.5	7.5 +0.5	5.9	12	23	7	38	17	19
GN 214.3-6-25	6	25	2.3	0.5	7.5 +0.5	5.9	12	23	7	38	17	20
GN 214.3-6-30	6	30	2.3	0.5	7.5 +0.5	5.9	12	23	7	38	17	21
GN 214.3-6-35	6	35	2.3	0.5	7.5 +0.5	5.9	12	23	7	38	17	21
GN 214.3-6-40	6	40	2.3	0.5	7.5 +0.5	5.9	12	23	7	38	17	22
GN 214.3-6-45	6	45	2.3	0.5	7.5 +0.5	5.9	12	23	7	38	17	23
GN 214.3-6-50	6	50	2.3	0.5	7.5 +0.5	5.9	12	23	7	38	17	24
GN 214.3-8-16	8	16	2.8	0.6	10 +0.5	7.9	12	23	8.4	38	35	21
GN 214.3-8-20	8	20	2.8	0.6	10 +0.5	7.9	12	23	8.4	38	35	22
GN 214.3-8-25	8	25	2.8	0.6	10 +0.5	7.9	12	23	8.4	38	35	24
GN 214.3-8-30	8	30	2.8	0.6	10 +0.5	7.9	12	23	8.4	38	35	25
GN 214.3-8-35	8	35	2.8	0.6	10 +0.5	7.9	12	23	8.4	38	35	27
GN 214.3-8-40	8	40	2.8	0.6	10 +0.5	7.9	12	23	8.4	38	35	29
GN 214.3-8-45	8	45	2.8	0.6	10 +0.5	7.9	12	23	8.4	38	35	31
GN 214.3-8-50	8	50	2.8	0.6	10 +0.5	7.9	12	23	8.4	38	35	32
GN 214.3-10-20	10	20	3.3	1	12 +1	9.9	16	28	9.8	42	47	39
GN 214.3-10-25	10	25	3.3	1	12 +1	9.9	16	28	9.8	42	47	42
GN 214.3-10-30	10	30	3.3	1	12 +1	9.9	16	28	9.8	42	47	45
GN 214.3-10-35	10	35	3.3	1	12 +1	9.9	16	28	9.8	42	47	47
GN 214.3-10-40	10	40	3.3	1	12 +1	9.9	16	28	9.8	42	47	50
GN 214.3-10-45	10	45	3.3	1	12 +1	9.9	16	28	9.8	42	47	52
GN 214.3-10-50	10	50	3.3	1	12 +1	9.9	16	28	9.8	42	47	54
GN 214.3-10-60	10	60	3.3	1	12 +1	9.9	16	28	9.8	42	47	59
GN 214.3-12-25	12	25	3.8	1	14 +1	11.9	16	28	11.3	42	75	53
GN 214.3-12-30	12	30	3.8	1	14 +1	11.9	16	28	11.3	42	75	55
GN 214.3-12-35	12	35	3.8	1	14 +1	11.9	16	28	11.3	42	75	59
GN 214.3-12-40	12	40	3.8	1	14 +1	11.9	16	28	11.3	42	75	62
GN 214.3-12-45	12	45	3.8	1	14 +1	11.9	16	28	11.3	42	75	67
GN 214.3-12-50	12	50	3.8	1	14 +1	11.9	16	28	11.3	42	75	70
GN 214.3-12-60	12	60	3.8	1	14 +1	11.9	16	28	11.3	42	75	77
GN 214.3-12-70	12	70	3.8	1	14 +1	11.9	16	28	11.3	42	75	84
GN 214.3-12-80	12	80	3.8	1	14 +1	11.9	16	28	11.3	42	75	91
GN 214.3-16-30	16	30	4.8	1.2	19 +1	15.9	20	32	14.2	46.5	138	102
GN 214.3-16-35	16	35	4.8	1.2	19 +1	15.9	20	32	14.2	46.5	138	109
GN 214.3-16-40	16	40	4.8	1.2	19 +1	15.9	20	32	14.2	46.5	138	116
GN 214.3-16-45	16	45	4.8	1.2	19 +1	15.9	20	32	14.2	46.5	138	122
GN 214.3-16-50	16	50	4.8	1.2	19 +1	15.9	20	32	14.2	46.5	138	129
GN 214.3-16-60	16	60	4.8	1.2	19 +1	15.9	20	32	14.2	46.5	138	143
GN 214.3-16-70	16	70	4.8	1.2	19 +1	15.9	20	32	14.2	46.5	138	155
GN 214.3-16-80	16	80	4.8	1.2	19 +1	15.9	20	32	14.2	46.5	138	168