GN 114.6 Stainless Steel-Locking pins Stainless Steel knob, with axial lock (Pawl)

Description

Specification

Knob / Push button / Slide

Stainless Steel AISI 303

Pawl

Stainless Steel AISI 304 (sheet metal)

Spring

Stainless Steel AISI 301

Stainless Steel-Locking pins with axial lock GN 114.6 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be often removed and replaced again.

The rectangular pawls made of Stainless Steel sheet metal keep the locking pin in an axial position in the bore. It can be retracted by pressing the button, once released it returns the pressure spring into its locking position.

The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

Range of lock pins

Accessory

Ball chains GN 111

Stainless Steel-Ball chains GN 111.5

Retaining cables GN 111.2

Spiral retaining cables GN 111.4

Technical information

Stainless Steel characteristics

Plastic characteristics

GN 114.6

Filter
Description	d₁ -0.1	l₁ +0.4	a	b	d₂	d₃	d₄	d₅	l₂	l₃	Load in kN ≈ (Double sided shear force) see information	Weight
GN 114.6-6-16	6	16	2.3	0.5	7.5 +0.5	5.9	12	25	7	20	17	33
GN 114.6-6-20	6	20	2.3	0.5	7.5 +0.5	5.9	12	25	7	20	17	34
GN 114.6-6-25	6	25	2.3	0.5	7.5 +0.5	5.9	12	25	7	20	17	35
GN 114.6-6-30	6	30	2.3	0.5	7.5 +0.5	5.9	12	25	7	20	17	36
GN 114.6-6-35	6	35	2.3	0.5	7.5 +0.5	5.9	12	25	7	20	17	37
GN 114.6-6-40	6	40	2.3	0.5	7.5 +0.5	5.9	12	25	7	20	17	38
GN 114.6-6-45	6	45	2.3	0.5	7.5 +0.5	5.9	12	25	7	20	17	40
GN 114.6-6-50	6	50	2.3	0.5	7.5 +0.5	5.9	12	25	7	20	17	40
GN 114.6-8-16	8	16	2.8	0.6	10 +0.5	7.9	15	30	8.4	21	35	53
GN 114.6-8-20	8	20	2.8	0.6	10 +0.5	7.9	15	30	8.4	21	35	55
GN 114.6-8-25	8	25	2.8	0.6	10 +0.5	7.9	15	30	8.4	21	35	57
GN 114.6-8-30	8	30	2.8	0.6	10 +0.5	7.9	15	30	8.4	21	35	59
GN 114.6-8-35	8	35	2.8	0.6	10 +0.5	7.9	15	30	8.4	21	35	60
GN 114.6-8-40	8	40	2.8	0.6	10 +0.5	7.9	15	30	8.4	21	35	62
GN 114.6-8-45	8	45	2.8	0.6	10 +0.5	7.9	15	30	8.4	21	35	65
GN 114.6-8-50	8	50	2.8	0.6	10 +0.5	7.9	15	30	8.4	21	35	66
GN 114.6-10-20	10	20	3.3	1	12 +1	9.9	18	34	9.8	26	47	87
GN 114.6-10-25	10	25	3.3	1	12 +1	9.9	18	34	9.8	26	47	90
GN 114.6-10-30	10	30	3.3	1	12 +1	9.9	18	34	9.8	26	47	93
GN 114.6-10-35	10	35	3.3	1	12 +1	9.9	18	34	9.8	26	47	56
GN 114.6-10-40	10	40	3.3	1	12 +1	9.9	18	34	9.8	26	47	99
GN 114.6-10-45	10	45	3.3	1	12 +1	9.9	18	34	9.8	26	47	103
GN 114.6-10-50	10	50	3.3	1	12 +1	9.9	18	34	9.8	26	47	106
GN 114.6-10-60	10	60	3.3	1	12 +1	9.9	18	34	9.8	26	47	111
GN 114.6-12-25	12	25	3.8	1	14 +1	11.9	18	34	11.3	26	75	99
GN 114.6-12-30	12	30	3.8	1	14 +1	11.9	18	34	11.3	26	75	104
GN 114.6-12-35	12	35	3.8	1	14 +1	11.9	18	34	11.3	26	75	109
GN 114.6-12-40	12	40	3.8	1	14 +1	11.9	18	34	11.3	26	75	113
GN 114.6-12-45	12	45	3.8	1	14 +1	11.9	18	34	11.3	26	75	117
GN 114.6-12-50	12	50	3.8	1	14 +1	11.9	18	34	11.3	26	75	121
GN 114.6-12-60	12	60	3.8	1	14 +1	11.9	18	34	11.3	26	75	124
GN 114.6-12-70	12	70	3.8	1	14 +1	11.9	18	34	11.3	26	75	139
GN 114.6-12-80	12	80	3.8	1	14 +1	11.9	18	34	11.3	26	75	146
GN 114.6-16-30	16	30	4.8	1.2	19 +1	15.9	22	40	14.2	32	138	181
GN 114.6-16-35	16	35	4.8	1.2	19 +1	15.9	22	40	14.2	32	138	188
GN 114.6-16-40	16	40	4.8	1.2	19 +1	15.9	22	40	14.2	32	138	196
GN 114.6-16-45	16	45	4.8	1.2	19 +1	15.9	22	40	14.2	32	138	203
GN 114.6-16-50	16	50	4.8	1.2	19 +1	15.9	22	40	14.2	32	138	212
GN 114.6-16-60	16	60	4.8	1.2	19 +1	15.9	22	40	14.2	32	138	226
GN 114.6-16-70	16	70	4.8	1.2	19 +1	15.9	22	40	14.2	32	138	243
GN 114.6-16-80	16	80	4.8	1.2	19 +1	15.9	22	40	14.2	32	138	258
GN 114.6-20-30	20	30	4.8	1.2	23 +1	19.8	25	40	14.8	33	228	219
GN 114.6-20-35	20	35	4.8	1.2	23 +1	19.8	25	40	14.8	33	228	229
GN 114.6-20-40	20	40	4.8	1.2	23 +1	19.8	25	40	14.8	33	228	241
GN 114.6-20-45	20	45	4.8	1.2	23 +1	19.8	25	40	14.8	33	228	256
GN 114.6-20-50	20	50	4.8	1.2	23 +1	19.8	25	40	14.8	33	228	266
GN 114.6-20-60	20	60	4.8	1.2	23 +1	19.8	25	40	14.8	33	228	293
GN 114.6-20-70	20	70	4.8	1.2	23 +1	19.8	25	40	14.8	33	228	314
GN 114.6-20-80	20	80	4.8	1.2	23 +1	19.8	25	40	14.8	33	228	330